Dick Morland's Discussions (908)

Discussions Replied To (675) Replies Latest Activity

"Ben, You're on plane at 15 mph. Suggestion--- your 8.1 Crusaders are great engines,…"

Dick Morland replied on Tuesday to 410 Commander Cruise speed/rpms

13 on Thursday
Reply by William (Bruno) Millonig

"I agree with Tim. I think it's a good chance you have a partially blocked riser and…"

Dick Morland replied on Tuesday to Oil Pressure Drop & Power Drop - 327F

9 on Tuesday
Reply by Mike H

"I remember 1.5 quarts on our 38, but I think the half quart was because of the reduc…"

Dick Morland replied Sep 12 to Paragon HF-7 Initiall Fill

4 Sep 13
Reply by Pat Kelly

"Dennis, Run for your life from this boat. No, the shafts do not run under the engine…"

Dick Morland replied Sep 11 to 1970 35' Commander

26 on Tuesday
Reply by dennis amore

"Well, those are not vee drives. Had they been, I would have advised you to run for y…"

Dick Morland replied Sep 10 to 1970 35' Commander

26 on Tuesday
Reply by dennis amore

"Considering prop sizing for your boat, let’s think way outside the box. Instead of t…"

Dick Morland replied Sep 8 to Proper Prop - 23 Commander

12 Sep 14
Reply by Craig Wilson

"Many years ago at Michigan City our floating docks were infested with spiders. It wa…"

Dick Morland replied Sep 7 to Odd holes?

18 Sep 9
Reply by Mark Steinmann

"Spiders you say ?? Google "Barn Spray for spiders".  Works great :-)"

Dick Morland replied Sep 6 to Odd holes?

18 Sep 9
Reply by Mark Steinmann

"I agree with Steve. I put a 2 x 4 between a prop blade and the hull and then really…"

Dick Morland replied Sep 5 to Prop nuts coming loose

8 Sep 9
Reply by Mark Wisniewski

"Mark, Never got your e-mail Resend to  dick@commanderhq.com"

Dick Morland replied Sep 5 to 350q distributor, advance springs

5 Sep 5
Reply by Dick Morland


Club News

Styled In Fiberglass

For your reading pleasure, the latest issue of the Chris-Craft Commander Club's newsletter, Styled In Fiberglass, along with past issues, can you accessed through the link below.

Styled In Fiberglass Issues


The 2018 Chris-Craft Commander Club National Rendezvous is in the books and it was a great time!!

City of Mentor, Ohio

The city of Mentor, Ohio and the Lawnfield Inn & Suites were wonderful hosts.  A special Thanks to Rob Kneen, the local member sponsor, and Char Pike for the hours of hard work put in organizing and coordinating an amazing weekend. 

The Rendezvous Photo Albums can be accessed through the links below, as well as, under Library, Photo Albums.  We will continue to add links to other albums as they become available. Also below, you will find links to a couple articles written for the local newspaper.

Photo Album 1                 Photo Album 2  

Photo Album 3


Chris-Craft Commander Club Celebrates Anniversary in Mentor

Chris-Craft Commander connoisseurs congregate at Mentor Lagoons Marina



© 2018   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service