Mike Yancey's Discussions (36)

Discussions Replied To (31) Replies Latest Activity

Chief Commander

"Lee, I finally purchased a couple of the new Mallory electronic distributors for my…"

Mike Yancey replied Jun 13 to Mallory Crab Caps NOS beware

4 Jun 13
Reply by Mike Yancey

"Jim, are you happy with the Mallory/Sierra YLM replacement distributor? How long hav…"

Mike Yancey replied Nov 17, 2016 to 350Q Timing evaluation

20 Nov 17, 2016
Reply by Mike Yancey

"Yeah I too was in the $400 range. I wish I was earlier in the season and could get i…"

Mike Yancey replied Nov 17, 2016 to 350Q Timing evaluation

20 Nov 17, 2016
Reply by Mike Yancey

"Steve, yes this is the distributor but it also carriers a part number 9-23611 as wel…"

Mike Yancey replied Nov 17, 2016 to 350Q Timing evaluation

20 Nov 17, 2016
Reply by Mike Yancey

"Jim, The non original flywheel had a mark. That was what I needed to determine was w…"

Mike Yancey replied Nov 17, 2016 to 350Q Timing evaluation

20 Nov 17, 2016
Reply by Mike Yancey

"Update: I removed all the spark plugs. I tried to turn the engine with a ratchet att…"

Mike Yancey replied Nov 16, 2016 to 350Q Timing evaluation

20 Nov 17, 2016
Reply by Mike Yancey

"MIke, I will attempt that first. I have to admit, I did not remove ALL the plugs at…"

Mike Yancey replied Nov 14, 2016 to 350Q Timing evaluation

20 Nov 17, 2016
Reply by Mike Yancey

"Dan, yes, I had a mirror and was looking for dimples on the bottom since I could see…"

Mike Yancey replied Nov 14, 2016 to 350Q Timing evaluation

20 Nov 17, 2016
Reply by Mike Yancey

"Darin, As you probably know, the amount of area between the bulkhead and the engine…"

Mike Yancey replied Nov 14, 2016 to 350Q Timing evaluation

20 Nov 17, 2016
Reply by Mike Yancey

"Jim, thanks. I currently run Pertronix with the original distributors and the coil s…"

Mike Yancey replied Nov 14, 2016 to lancer repower part 2

20 Oct 18, 2017
Reply by Jeffrey Wood

RSS

Club News

Registration Is Open!!

City of Mentor, Ohio

What: 2018 Chris-Craft Commander Club National Rendezvous

When: July 27 - 29, 2018

Learn everything you need to know about the 2018 Chris-Craft Commander Club National Rendezvous by clicking the link below (You can register here too!!):

2018 Rendezvous Site

_________________________________________

 Chris-Craft Commander Club YouTube Channel

In an effort to expand the video sharing for the club, we have built a YouTube Channel. We hope you enjoy watching the wonderful videos our members have chosen to share.    

  Click Here To Learn More

_________________________________________

© 2018   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service