Looking to buy Heads, Exhaust Manifolds, End Caps for Commander 1972 42'

Hi Everybody, 

I hope you are doing well. Love this club and wanted to share gratitude in advance. 

I am looking for the following parts:

1. Ford 427 '69-72 Heads with Casting #C7JE-A  (FE390 should be interchangeable or C7TE-A) 

2. Exhaust manifolds with casting #7710 5CC,  and Date 11-4-89   consider Fresh Water Cooling System. 

3. Matching End Caps for the exhaust manifolds.  Part number #7782 

4. Heat Exchanger for the sump oil pan

5. Gaskets for all above

6. Hoses 

I am rebuilding my second engine and things are going well. Just changed gaskets on the velvet drive transmission which was difficult to get at. 

Let me know what you got,

Thank you, 

Jesse 

Views: 309

Reply to This

Replies to This Discussion

Jesse, I still have one set of heads ready to bolt on. .....bsmith4911@aol.com....byron

Emailed you Byron. Thanks 

Byron Smith said:

Jesse, I still have one set of heads ready to bolt on. .....bsmith4911@aol.com....byron

Are you rebuilding the engines in the boat?  Any pictures of the process would be great to see if/when I have to do the same!  Hope things keep going well, and you find all the parts you need. 

I have one sump oil cooler. Contact me via text 704-287-3914 I’ll ask the owner of it for a price.

Jesse---I have a couple of 427 heads from 1973 chris craft boat I repowered. I do not know the casting #s but can check if you might be interested. I sold the exhaust manifolds/oil sump coolers already but do have the engine heat exchangers,intake manifold,starter and excellent carb

I have a set of manifolds. No risers.

I have exhaust manifolds......risers.........the end caps are on the manifolds.....

I also have  starters....alternators.......front engine mounts.....water and circ. pumps......many other parts less block and heads

Did you get my response to your message, Jesse?
Hi Jesse
If You haven't yet got all the parts you need I have most of that stuff
You Can Contact me at Jeremy@custommarine.biz

Hi Matt, 

Thanks for your response. Got it and if those other items come up I will place my order.

Matt Cowles said:

Did you get my response to your message, Jesse?

Hi Troy, 

Thanks for reaching out. What casting numbers do you have on the Manifolds? What year are they from? 

troy floyd said:

I have exhaust manifolds......risers.........the end caps are on the manifolds.....

Reply to Discussion

RSS

Club News

Styled In Fiberglass

For your reading pleasure, the latest issue of the Chris-Craft Commander Club's newsletter, Styled In Fiberglass, along with past issues, can you accessed through the link below.

Styled In Fiberglass Issues

________________________________________

The 2018 Chris-Craft Commander Club National Rendezvous is in the books and it was a great time!!

City of Mentor, Ohio

The city of Mentor, Ohio and the Lawnfield Inn & Suites were wonderful hosts.  A special Thanks to Rob Kneen, the local member sponsor, and Char Pike for the hours of hard work put in organizing and coordinating an amazing weekend. 

The Rendezvous Photo Albums can be accessed through the links below, as well as, under Library, Photo Albums.  We will continue to add links to other albums as they become available. Also below, you will find links to a couple articles written for the local newspaper.

Photo Album 1                 Photo Album 2  

Photo Album 3

Articles:

Chris-Craft Commander Club Celebrates Anniversary in Mentor

Chris-Craft Commander connoisseurs congregate at Mentor Lagoons Marina

_________________________________________

 

© 2018   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service