Does anybody knows the standard size of the props, for a 36 sport fisharman 1977, gas.

Views: 102

Reply to This

Replies to This Discussion

The 360 Commander with 454s came with 22x26 T36 props.

Thks John, do you know the size of the shaft?

1.375" x 116.5"

Thks. It seems like either you were part of the building team, or have spared a good part of your time around the CC...

I am trying to bring an old 36 back to life, and if it's weren't for the commander club I won't be able to find much about it

Thanks very much
I own a little business called Chris Parts LLC, so this is what I do every day. Please check out my website, chrisparts.com and call me if I can help in any way.

John

My 1973 36 TF came with 22x26 three blade props 

Super, I had visited the site in the past.
Just registered

John Scherzinger said:
I own a little business called Chris Parts LLC, so this is what I do every day. Please check out my website, chrisparts.com and call me if I can help in any way.

John
Thks Al, it seems that is the consensus, and that looks like it.
Quick question, is your 36 gas or diesel

Al Edwards said:

My 1973 36 TF came with 22x26 three blade props 

Mine had 427 gas engines , I just repowered with Mercruiser Horizon 8.1s with ZF 63A transmissions. I left the props and replaced the 1 3/8'' original shafts with 1 3/8'' Aquamet 22 shafts to handle the extra HP and torque. I put it in the water hopefully next weekend!

Al:

how many Horsepower had the 427, and how many the new Mercruiser's do have?

I think with a marine engine torque is mostly king. Thats one reason the 427s were a good marine engine as they prob pushed a shade over 300hp and produced about 400ft lbs of torque at 2800-3000rpm. The 8.1s are undersquare motors with the stroke longer than the bore and make about 375hp and produce 490ft lbs of torque at 3200 rpm. You can get 420hp 8.1s that produce 520 ft lbs, but they do it at a higher rpm--I thought the 370-375 version was a bit more torquey at the lower rpm. So both motors do pretty well for gas motors on the torque side and at relatively lower rpms much like a diesel does. The earlier 8.1s had a few problems with water ingestion in somewhat rare cases, but I think a couple of design changes resolved those. You would need to get new transmissions(if yours are paragons as was mine) as the 427s came in right and left rotating configuration--the 8.1s all go one way.

Reply to Discussion

RSS

Club News

Photo Contest Winner!

See more details in this forum post.

A photo album with all contributions is displayed below in or Photo Album section.

__________________________________________

Commander Styling Story

© 2017   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service