This site was very helpful with getting my fuel pump rebuilt and working great, so maybe someone knows about the water pump too!
Long story short, I shredded an impeller vane, stopped pumping water. I dug all the rubber bits out of the hoses and transmission cooler, then replaced the impeller. Still not sucking water up. I’m thinking the seal around the shaft is bad. I took the pump halfway apart before realizing there is very little info on this pump model. I found a replacement front seal for 15$ on ebay, but have no idea how to replace.
Anyone have any experience with this?

Views: 52

Reply to This

Replies to This Discussion

Are you sure the inlet is clear and airtight. If it is not sucking water, it will also shred impellers quickly. There are a lot of exploded parts diagrams and info on the Sherwood site.

Reply to Discussion

RSS

Club News

Registration Is Open!!

City of Mentor, Ohio

What: 2018 Chris-Craft Commander Club National Rendezvous

When: July 27 - 29, 2018

Learn everything you need to know about the 2018 Chris-Craft Commander Club National Rendezvous by clicking the link below (You can register here too!!):

2018 Rendezvous Site

_________________________________________

 Chris-Craft Commander Club YouTube Channel

In an effort to expand the video sharing for the club, we have built a YouTube Channel. We hope you enjoy watching the wonderful videos our members have chosen to share.    

  Click Here To Learn More

_________________________________________

© 2018   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service