Hi, while trying to reconnect a wire (screw fell out) in the light bulb socket, I touched the + and - wires together (on our 1970 35’ CCC Sports Cruiser), I did not turn off the battery or breaker - dumb. There was a small spark and then the other two lights on that circuit went out. The ciruit breaker did not trip. Classic Square D panel and breakers - see pic. Anyway, I think the breaker is fine, but I am not totally sure which breaker it is? Any ideas as to what may be failing in the circuit? I would guess that something is fried, somewhere, but before I test all the breakers, start tracing wires-ugh, I thought I would reach out and see if anyone else has done something similar.
top of page
To test this feature, visit your live site.
Edited: Jul 04
Crossed 12 V light wires - now circuit not working
Crossed 12 V light wires - now circuit not working
6 comments
Comments (6)
bottom of page
Thanks all, problem solved…turns out I am not the brightest bulb in the pack…I was looking at the wrong panel, the breaker was tripped. Turned the correct breaker on, off and on again, and voila, circuit is fine. I appreciate all of the Commander Club Members!