Rob P's Discussions (26)

Discussions Replied To (24) Replies Latest Activity

"My 27' was repowered with a 350 and has the original 327 valve covers... "

Rob P replied Apr 14 to repower options for 17’ super sport with 327f

6 Apr 14
Reply by lftmx3

"Butyl tape would work, less mess"

Rob P replied Sep 4, 2018 to Re-bedding screws

7 Sep 5, 2018
Reply by Byron Smith

"Boatlife sealant, also check out this article...http://www.boatus.com/boattech/casey…"

Rob P replied Sep 4, 2018 to Re-bedding screws

7 Sep 5, 2018
Reply by Byron Smith

"Before you have to do the worse case...a Chris Craft Boat and Parts Room Facebook pa…"

Rob P replied Aug 11, 2018 to In need of door latch assembly

7 Aug 13, 2018
Reply by Jim Clynes

"found this on eBay...$50, handle instead of knob on 1 side. https://www.ebay.com/itm…"

Rob P replied Aug 11, 2018 to In need of door latch assembly

7 Aug 13, 2018
Reply by Jim Clynes

"I've been looking for a trailer for my 27' since my home made utility/boat trailer d…"

Rob P replied Jul 22, 2018 to 27’ Commander Trailer

27 Jul 23, 2018
Reply by Steve

"Good score. Just saw your final photo, wow nice job, looks 1000x better."

Rob P replied Jun 24, 2018 to Taking a chain saw to my Commander

53 Jun 24, 2018
Reply by Rob P

"If you go the traditional varnish route, use a wood sealer before the varnish coats…"

Rob P replied Jun 24, 2018 to Restoring Teak Trim CCC 42 1968

6 Jul 2, 2018
Reply by John Brock

"Jeff, I diid all the exterior pieces and the cabin door. There was some issues with…"

Rob P replied Jan 29, 2018 to Stripping Wood Chris Craft Mast

26 Jan 30, 2018
Reply by Timothy "Tim" Miller

"Jeff, I did the same as Greg and Tim but I had to use stain and filler on my bare wo…"

Rob P replied Jan 28, 2018 to Stripping Wood Chris Craft Mast

26 Jan 30, 2018
Reply by Timothy "Tim" Miller

RSS

Club News

2019 Regional Rendezvous Hosts Wanted

Are you yearning for a little fix for Commander-itis?

Would you like to meet other Commander owners in your area?

Do you have a great idea for a Commander gathering on or off the water?

If you answered yes to any of these questions, then we have just the remedy for you: We encourage you to think about hosting, or, indicating your interest in hosting a Regional Rendezvous in your area in 2019.

For more information about hosting - click here:

Hosting A Rendezvous

Char Pike has volunteered to be the EC “Point Person” for 2019 Regional Rendezvous. Please contact Char if you are interested in organizing & holding a Regional Rendezvous in your area. Char’s e-mail address is rendezvous.commanderclub@gmail.com

_________________________

Help Wanted!!!

New Faces, New Perspectives - Executive Committee Openings to start in January 2020

Would you like to be more active in the Commander Club? Would you like to help chart our course? Are you willing to commit the time, energy and creativity needed to assist us in promoting and supporting our mission?

We are searching for new faces and new perspectives. Positions start in January 2020 for a two year term.

There are four positions available. Chief Commander, Treasurer, Public Relations Chair and Membership Chair.

Duties for each position are located in the bylaws https://commanderclub.com/page/bylaws

More details about each position here.

The Executive Committee (EC) convenes monthly via conference call. Meetings typically last 90 minutes or less. Most work done via e-mail. Each job has its own time commitment depending on club activities. Current EC members will mentor you.

Interested in any of these positions?

Please drop Char Pike an e-mail at archivist.commanderclub@gmail.com

________________

SuperDisc 14.0 and Resource Collection 4.0 Available Now!

SuperDisc 14.0 is an electronic encyclopedia of every aspect of Commander maintenance and repairs. The information on the disk is retrieved from the discussion forum and e-mail list, but organized in a way that makes information easy to find and use. SuperDisc is available on USB flash drive

Click here for more details https://commanderclub.com/page/superdisk

The SuperDisc 14.0 Complete Edition is for first time buyers of SuperDiscs.

The SuperDisc 14.0 Upgrade Edition is intended for those who wish to upgrade their SuperDisc 1.0 through 13.0. Each year we add over 1,000 posts. Don’t miss out.

Resource Collection 4.0 is great to own too!!!

The Resource Collection 4.0 contents include CC Catalogs and Brochures. CC Service Bulletins, CC Price Lists. Engine & Transmission Manuals. Dick Avery sketches and drawings, a folder for every Commander model, and all kinds of technical and interesting stuff. Over 187 folders and 2,563 Files. A true “Treasure Trove” for the Commander owner!

We thank you for supporting the club with your purchase of SuperDisc14.0 and/or Resource Collection 4.0. We hope you find it to be the value we feel it is, and trust you will enjoy the other benefits your payment will help provide. It’s your payment that helps to support the activities of this dues free organization that has grown from 12 members in 1999 to well over 4000 members in 2019.

To order now click here!

     

© 2019   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service