I have a lot of good parts from the 427s that were removed from my 35 as I am repowering my boat. 

The blocks , exhauts manafolds, alternaters, 1 set of heads , and some smalls are no longer available 

You can email me at jeremy@custommarine.biz     

If you are intrested in something

  • I have a lot more parts than what i have in the  pictures below

Views: 459

Reply to This

Replies to This Discussion

Hello, Do you have two sets of the risers? Thank you

those oil coolers are hard to find!!!

Sterling - if you didn’t already know, those risers are custom made out of copper by Marine Manifold Corp on Long Island. We’re just finishing our fifth year with a set and they’ve been great!

Yes I have all four copper risers

How much for the risers and carbeurator?

interested in blocks if they re std bore & in good shape

Sorry But I've sold both blocks.

I still have lots of other parts

mike ingleby said:

interested in blocks if they re std bore & in good shape

do you still have the crankshafts and if you do what kind of shape.

Hi Terry,

Yes I still do have both cranks.

As I Originally intended to rebuild both of my 427s the stbd. Crank has been ground to 10thousanths under by my machine shop and should be ready to use . The port crank appears to be in nice shape but has not yet been ground yet as I decided to go the repower route at around that time.

Both are clean and wrapped in plastic  


 
Terry Gloss said:

do you still have the crankshafts and if you do what kind of shape.

UPDATE:

Many of my 427  parts have been sold but I still have several mostly bolt on external parts.

I dont have blocks, heads, rotating assys. , exhaust manifolds , oil coolers. 

Heres a list of some things I still have:

-bell housings

-damper plates

-1 water pump

-1 alternator

-2 rebuilt afb carbs

-2 cast iron oil pans

-2 sets of copper cooling tubes

-2 circ. Pumps

-6 engine mounts

-stbd. Distributer 

-all 4 copper exhaust risers

-2 working HJ7 paragon tranys 

-2 dip stick tubes

-2 copper collector tubes 3.5" to 4.5" 

-2 4.5" copper exhaust elbows (they go after the collectors )

-misc. Bracketry 

-2 matching 22"×26" × 1 3/8" bore

Orig. To the boat 3 blade props in good condition 

-1 spare stainless 1 3/8" dia prop shaft 

Heres a few photos .  I'm sure I'm leaving some things out .

Id love to have my garage space back  ; ) so who needs parts.

Jeremy, I am interested in all the copper pcs you have and the carbs. price them!! Contact me at shootinirons45@gmail.com

I would like to brighten up my engines a little. Thanks

Sent you an email

Mark Steinmann said:

Jeremy, I am interested in all the copper pcs you have and the carbs. price them!! Contact me at shootinirons45@gmail.com

I would like to brighten up my engines a little. Thanks

Reply to Discussion

RSS

Club News

Spring 2019 Styled In Fiberglass is now available!!

The Chris-Craft Commander Club publishes it's newsletter, Styled In Fiberglass, twice a year and the 2019 Spring issue is now available for download.  Click here for more details and to download this issue.

_________________________

Help Wanted!!!

New Faces, New Perspectives - Executive Committee Openings to start in January 2020

Would you like to be more active in the Commander Club? Would you like to help chart our course? Are you willing to commit the time, energy and creativity needed to assist us in promoting and supporting our mission?

We are searching for new faces and new perspectives. Positions start in January 2020 for a two year term.

There are four positions available. Chief Commander, Treasurer, Public Relations Chair and Membership Chair.

Duties for each position are located in the bylaws https://commanderclub.com/page/bylaws

More details about each position here.

The Executive Committee (EC) convenes monthly via conference call. Meetings typically last 90 minutes or less. Most work done via e-mail. Each job has its own time commitment depending on club activities. Current EC members will mentor you.

Interested in any of these positions?

Please drop Char Pike an e-mail at archivist.commanderclub@gmail.com

________________

SuperDisc 14.0 and Resource Collection 4.0 Available Now!

SuperDisc 14.0 is an electronic encyclopedia of every aspect of Commander maintenance and repairs. The information on the disk is retrieved from the discussion forum and e-mail list, but organized in a way that makes information easy to find and use. SuperDisc is available on USB flash drive

Click here for more details https://commanderclub.com/page/superdisk

The SuperDisc 14.0 Complete Edition is for first time buyers of SuperDiscs.

The SuperDisc 14.0 Upgrade Edition is intended for those who wish to upgrade their SuperDisc 1.0 through 13.0. Each year we add over 1,000 posts. Don’t miss out.

Resource Collection 4.0 is great to own too!!!

The Resource Collection 4.0 contents include CC Catalogs and Brochures. CC Service Bulletins, CC Price Lists. Engine & Transmission Manuals. Dick Avery sketches and drawings, a folder for every Commander model, and all kinds of technical and interesting stuff. Over 187 folders and 2,563 Files. A true “Treasure Trove” for the Commander owner!

We thank you for supporting the club with your purchase of SuperDisc14.0 and/or Resource Collection 4.0. We hope you find it to be the value we feel it is, and trust you will enjoy the other benefits your payment will help provide. It’s your payment that helps to support the activities of this dues free organization that has grown from 12 members in 1999 to well over 4000 members in 2019.

To order now click here!

     

© 2019   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service