I have a lot of good parts from the 427s that were removed from my 35 as I am repowering my boat. 

The blocks , exhauts manafolds, alternaters, 1 set of heads , and some smalls are no longer available 

You can email me at jeremy@custommarine.biz     

If you are intrested in something

  • I have a lot more parts than what i have in the  pictures below

Views: 253

Reply to This

Replies to This Discussion

Hello, Do you have two sets of the risers? Thank you

those oil coolers are hard to find!!!

Sterling - if you didn’t already know, those risers are custom made out of copper by Marine Manifold Corp on Long Island. We’re just finishing our fifth year with a set and they’ve been great!

Yes I have all four copper risers

How much for the risers and carbeurator?

interested in blocks if they re std bore & in good shape

Sorry But I've sold both blocks.

I still have lots of other parts

mike ingleby said:

interested in blocks if they re std bore & in good shape

do you still have the crankshafts and if you do what kind of shape.

Hi Terry,

Yes I still do have both cranks.

As I Originally intended to rebuild both of my 427s the stbd. Crank has been ground to 10thousanths under by my machine shop and should be ready to use . The port crank appears to be in nice shape but has not yet been ground yet as I decided to go the repower route at around that time.

Both are clean and wrapped in plastic  


 
Terry Gloss said:

do you still have the crankshafts and if you do what kind of shape.

Reply to Discussion

RSS

Club News

2019 Regional Rendezvous Hosts Wanted

Are you yearning for a little fix for Commander-itis?

Would you like to meet other Commander owners in your area?

Do you have a great idea for a Commander gathering on or off the water?

If you answered yes to any of these questions, then we have just the remedy for you: We encourage you to think about hosting, or, indicating your interest in hosting a Regional Rendezvous in your area in 2019.

For more information about hosting - click here:

Hosting A Rendezvous

Char Pike has volunteered to be the EC “Point Person” for 2019 Regional Rendezvous. Please contact Char if you are interested in organizing & holding a Regional Rendezvous in your area. Char’s e-mail address is rendezvous.commanderclub@gmail.com

_________________________

Help Wanted!!!

New Faces, New Perspectives - Executive Committee Openings to start in January 2020

Would you like to be more active in the Commander Club? Would you like to help chart our course? Are you willing to commit the time, energy and creativity needed to assist us in promoting and supporting our mission?

We are searching for new faces and new perspectives. Positions start in January 2020 for a two year term.

There are four positions available. Chief Commander, Treasurer, Public Relations Chair and Membership Chair.

Duties for each position are located in the bylaws https://commanderclub.com/page/bylaws

More details about each position here.

The Executive Committee (EC) convenes monthly via conference call. Meetings typically last 90 minutes or less. Most work done via e-mail. Each job has its own time commitment depending on club activities. Current EC members will mentor you.

Interested in any of these positions?

Please drop Char Pike an e-mail at archivist.commanderclub@gmail.com

________________

2018 Photo Contest Winner

The 4th Annual Chris-Craft Commander Club Photo Contest had more than 50 entries and selecting the winners was not an easy task. 

First place: submitted by Pat Chaps

Second place: submitted by Martin Krall;

Third place: submitted by Jeff Pacy.

To view all entries to this year's contest,         Click Here

© 2019   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service