Does anyone have some photos of a new hydraulic steering system installed with the actuator mounted horizontally between the inboard stringers?

Im planning on doing this with a new uflex system but would love to see what kind of bracketry and rudder arm mods were done to make the existing rudders work with it

Views: 226

Reply to This

Replies to This Discussion

This is a picture of the actuator mounted next to the port stringer on a 30 TSF.  I  was lucky to have a fishbox hatch which made for an easy installation.  Bolted to the stringer with an angle plate and the actuator bolted to the original rudder link.  Well worth the effort and extra money


Thanks John,

Do you by chance have a few more photos of how its attached to the rudders/ tiebars?

Jeremy, sorry for the delay, but sending a picture of the tie to rudder.  Keep us posted on your progress!


Thanks John for the photos

Heres where im thinking of installing my hydraulic steering actuator  on my tiebar going between the inboard stringers.

I currently dont have the rudders or rudder ports installed yet after doing a lot of bilge restoration 

Reply to Discussion


Club News

2019 Regional Rendezvous Hosts Wanted

Are you yearning for a little fix for Commander-itis?

Would you like to meet other Commander owners in your area?

Do you have a great idea for a Commander gathering on or off the water?

If you answered yes to any of these questions, then we have just the remedy for you: We encourage you to think about hosting, or, indicating your interest in hosting a Regional Rendezvous in your area in 2019.

For more information about hosting - click here:

Hosting A Rendezvous

Char Pike has volunteered to be the EC “Point Person” for 2019 Regional Rendezvous. Please contact Char if you are interested in organizing & holding a Regional Rendezvous in your area. Char’s e-mail address is


Help Wanted!!!

New Faces, New Perspectives - Executive Committee Openings to start in January 2020

Would you like to be more active in the Commander Club? Would you like to help chart our course? Are you willing to commit the time, energy and creativity needed to assist us in promoting and supporting our mission?

We are searching for new faces and new perspectives. Positions start in January 2020 for a two year term.

There are four positions available. Chief Commander, Treasurer, Public Relations Chair and Membership Chair.

Duties for each position are located in the bylaws

More details about each position here.

The Executive Committee (EC) convenes monthly via conference call. Meetings typically last 90 minutes or less. Most work done via e-mail. Each job has its own time commitment depending on club activities. Current EC members will mentor you.

Interested in any of these positions?

Please drop Char Pike an e-mail at


2018 Photo Contest Winner

The 4th Annual Chris-Craft Commander Club Photo Contest had more than 50 entries and selecting the winners was not an easy task. 

First place: submitted by Pat Chaps

Second place: submitted by Martin Krall;

Third place: submitted by Jeff Pacy.

To view all entries to this year's contest,         Click Here

© 2019   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service