Looking for the location of the engine room blower motor on 30 tournament

  I just recently had the boat delivered and to be honest I've been too busy with the maintenance.  I've had the starters rebuilt, installed new fuel pumps, waiting on nee carburetors, replacing the water pumps. Were getting close to being ready but I've noticed the blower motors are not working. If anyone knows where they are located It would be a help i only had time to try and track them down for a little while last nite and my time is pretty limited on actual time on the boat before night sets in.

Thanks in advance 

Views: 116


Reply to This

Replies to This Discussion

I'm not sure but looking at the picture it seems tthere is a painted small vent on the port side just aft of the fwd intake vent.  This is the same location as on my 35.  The blower is mounted on the hull at that point and the intake goes to the lower bilge from there.  Actually the routing is across under the deck to centerline where it is fastened to one of the vertical deck supports and then is routed to the bilge vee.

Thank you, I made it down last nite and got to it. As with most everything it wasn't easy but it's done.
2 new carburetors, 2 new fuel pumps and rebuilt starters and the rats are running like glass. But the port needs a new oil cooler oh boy. I'll probably have the alternatord rebuilt after she gets laid up for the winter but I'm looking forward to enjoying her for a few weeks first.

Reply to Discussion


Club News

Save The Date!!

Chris-Craft Commander Club National Rendezvous

When:  July 24-26, 2020

Where:  Algonac, Michigan

Click Here for the most current details

Registration Open Date: TBD


SuperDisc 15.0 and Resource Collection 5.0 Available Now!

SuperDisc 15.0 is an electronic encyclopedia of every aspect of Commander maintenance and repairs. The information on the disk is retrieved from the discussion forum and e-mail list, but organized in a way that makes information easy to find and use. SuperDisc is available on USB flash drive

Click here for more details https://commanderclub.com/page/superdisk

The SuperDisc 15.0 Complete Edition is for first time buyers of SuperDiscs.

The SuperDisc 15.0 Upgrade Edition is intended for those who wish to upgrade their SuperDisc 1.0 through 14.0. Each year we add over 1,000 posts. Don’t miss out.

Resource Collection 5.0 is great to own too!!!

The Resource Collection 5.0 contents include CC Catalogs and Brochures. CC Service Bulletins, CC Price Lists. Engine & Transmission Manuals. Dick Avery sketches and drawings, a folder for every Commander model, and all kinds of technical and interesting stuff. Over 193 folders and 2,697 Files. A true “Treasure Trove” for the Commander owner!

We thank you for supporting the club with your purchase of SuperDisc15.0 and/or Resource Collection 5.0. We hope you find it to be the value we feel it is, and trust you will enjoy the other benefits your payment will help provide. It’s your payment that helps to support the activities of this dues free organization that has grown from 12 members in 1999 to well over 4400 members in 2020.

To order now click here!


Fall Edition of Styled In Fiberglass Available here!

The Fall 2019 Edition of the Chris-Craft Commander Club's newsletter, Styled In Fiberglass, is now available for your reading pleasure.  Click here to download this and past issues.


2019 Annual Photo Contest Winners

Sixty-Eight photos were submitted for this year's contest.  They were absolutely amazing, making selecting a top 3 an extremely difficult task for your Executive Committee

Thank you to all that submitted a photo to the contest and even if your photo was not in the top 3, it could appear on a cover of Styled In Fiberglass, the club's newsletter due out in November, or the 2020 Wall Calendars, which are now available.

2019 Photo Contest Winners

Past Photo Contest Winners

2019 Photo Contest Entries



© 2020   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service