Can anyone offer a source for Chris Craft hose number 16.54-00013?
This hose goes from the heat exchanger on a 454 to the exhaust manifold. Looks like the same hose number may have also been on the 305's and 350's.
The hose is a radiator hose with a reduction built into it. The end with the 90 degree bend has an inside diameter of 1-1/4", but the long end has an inside diameter of only 1".
Doing web searches hasn't found this hose or any cross reference (at least not that I could find).
Any help would be greatly appreciated!
Been there, done that. A-Line didn't have anything close.
Napa provided hose 8761. It's reasonably close in shape, if we trim the ends. Fits the 90 degree side fine. But it's a constant diameter hose - which is still 1-1/4" on the long end, that needs to go on a 1" fitting.
We may have to Frankenstein something...
try Harpur's Marine in California.
Hi John, Have you tried West Marine??? Also I found the Trident Hose info in the files section. Maybe give them a call??
Thank you - West Marine didn't have any of the part numbers I'm looking for. Trident makes good stuff, but as far as I can tell, they don't sell the individual molded radiator / water hoses.
I gave Harpur's a call. Their computers had blown up, and wouldn't be back online for another hour or so. I emailed them the part numbers I'm looking for, and will see if Tom can locate them. Fingers crossed!