Replacing Head holding tank 1986 338 commander fly bridge

Hi All

  So I'm going to replace my Black tank,  24 gallon, its has a hole at the top and seen better days!!!  Aluminum, going with Poly.  It seems pretty straight forward, its mid ship and accessible from the engine bay..   Just unscrew hoses and hold down it seems??

A Bigger question is, How would the fuel tanks come out if I ever need too???  Who engineered that install!!!

Rob s

Views: 125


Reply to This

Replies to This Discussion

There’s boats out there that you have to remove engines or even cut the deck out to get the tanks out. They install that stuff before they joint the deck. 

I see that,  Thats crazy, Hope I don't need to ever replace them, I'd rather add one between the engines ...

Mike H said:

There’s boats out there that you have to remove engines or even cut the deck out to get the tanks out. They install that stuff before they joint the deck. 

Removing the fuel tanks you need to cut the transom right behind the tanks to slide them out. Very costly project. 

So After a restless night looking things up about the gas tanks I was at the boat today this is a 1986 338 commander I have the cabin the bunks and then the like so for you love seats a Sectional with table ,well looking further into it the bottom of both of those bunks and love seats are screwed down and lo and behold you could pull the tanks right through the cabin that would be huge if I ever needed to do it great news

HI All

 I CUT out the Old holding tank, Ill post some pics tomorrow.Added a Used Poly Tank. I have a HUGE boat yard near me,  The old one was about 2 inches to wide to pull out of course, So I went to town with a Reciprocal saw...

It was completely rotted !!!   The boat had been on the dry for awhile ,the PO got it and started to restore it.

Now I'm tracing the AFT Lights and NAV Light issue, Not lighting, But when I give direct power they work, So a ground likely or switch, Tomorrows work..


Reply to Discussion


Club News

2019 Regional Rendezvous Hosts Wanted

Are you yearning for a little fix for Commander-itis?

Would you like to meet other Commander owners in your area?

Do you have a great idea for a Commander gathering on or off the water?

If you answered yes to any of these questions, then we have just the remedy for you: We encourage you to think about hosting, or, indicating your interest in hosting a Regional Rendezvous in your area in 2019.

For more information about hosting - click here:

Hosting A Rendezvous

Char Pike has volunteered to be the EC “Point Person” for 2019 Regional Rendezvous. Please contact Char if you are interested in organizing & holding a Regional Rendezvous in your area. Char’s e-mail address is


Help Wanted!!!

New Faces, New Perspectives - Executive Committee Openings to start in January 2020

Would you like to be more active in the Commander Club? Would you like to help chart our course? Are you willing to commit the time, energy and creativity needed to assist us in promoting and supporting our mission?

We are searching for new faces and new perspectives. Positions start in January 2020 for a two year term.

There are four positions available. Chief Commander, Treasurer, Public Relations Chair and Membership Chair.

Duties for each position are located in the bylaws

More details about each position here.

The Executive Committee (EC) convenes monthly via conference call. Meetings typically last 90 minutes or less. Most work done via e-mail. Each job has its own time commitment depending on club activities. Current EC members will mentor you.

Interested in any of these positions?

Please drop Char Pike an e-mail at


2018 Photo Contest Winner

The 4th Annual Chris-Craft Commander Club Photo Contest had more than 50 entries and selecting the winners was not an easy task. 

First place: submitted by Pat Chaps

Second place: submitted by Martin Krall;

Third place: submitted by Jeff Pacy.

To view all entries to this year's contest,         Click Here

© 2019   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service