Hello all,

First, let me just say.. winter please depart... Second I think the pressure regulator on my shore water is old and in need of maintenance. The flow at the dock is great and inside the sinks start out well but then the pressure drops off. I think this unit needs to come out and at least be cleaned or replaced.

Any thoughts here community?

Views: 87

Reply to This

Replies to This Discussion

Clean the aerator on each faucet. 

Do you have a gage downstream, if not can you rig one? It's good to have information, a rap with a hammer,  a turn of the regulator screw may solve the problem. 

I also have a 1980 Commander 410.  While mine is still very much in the middle (beginning?) of restoration, I did at least get the plumbing working.   (Plumbing was something I could work on in parallel while waiting for little if any engine progress...)

At this point, I don't have the shore water hooked up at all.  The regulator and valves were old and suspect.  The valves are old gate valves that are probably long since either stuck or would leak...  And no idea what the status of the regulator is.   

If I ever go for a shore water connection, I'll replace the entire works.  Though it's still not quite clear to me if it was intended to be able to fill the water tank from the shore water connection.

Part of my decision is biased of past bad experiences with high dock water pressure blowing out water lines.  I have a 100 gallon water tank (at least according to specs...).  That seems like PLENTY.   I'd much rather fill the tank and run off the water pressure pump.  In the absolute worst case of walking away from the boat with the water pump still on - at least I'd be limited to no more than 100 gallons of water in the bilge when I got back (and hopefully some amount of that already pumped out by the 4 bilge pumps!).

I would certainly NEVER leave shore water connected when I was away.

As for regulators...   I've used the "RV" style water pressure regulators that screw inline to the hose.  They seem to be reliable, and would be trivial to replace from time to time if they ever started clogging up.  The valve and regulator matrix that originally (?) came with the boat will be extremely challenging to remove / repair / replace.

Replace it with one that is of all bronze construction.  I went through the same thing when the original one with steel innards went bad on me during a holiday weekend.  The bronze version was an instant cure to the problem.

Reply to Discussion

RSS

Club News

                 _________________________

2021 Chris-Craft Commander Club National Rendezvous
Registration is open until July 8th for the 2021 National Rendezvous in Algonac, Michigan.
When:     July 23 - 25, 2021
Where:    Algonac Harbour Club
Click Here for more information.

                 _________________________

  

6th Annual CCCC Photo Contest Winners

1st Place: Mark Struebing, Michigan USA       Model:  1969 35 Sports Cruiser

2nd Place:   Kristian & Jacqueline, Illinois, US             Model:  1967 27' Commander Custom


3rd place:  Dawn Stone, Michigan, US                     Model:  1970 55' Commander

_________________________

SuperDisc 15.0 Morland Commemorative Edition and Resource Collection 6.0 Available Now!

SuperDisc 15.0 is an electronic encyclopedia of every aspect of Commander maintenance and repairs. The information on the disk is retrieved from the discussion forum and e-mail list, but organized in a way that makes information easy to find and use. SuperDisc is available on USB flash drive.  The Morland Commorative Edition is Superdisc 15.0 with the addition of the Spring 2020 Dick Morland Memorial Issue of STYLED IN FIBERGLASS. This is the last superdisc in its present format. 

Click here for more details https://commanderclub.com/page/superdisk

The SuperDisc 15.0 Complete Edition is for first time buyers of SuperDiscs.

The SuperDisc 15.0 Morland Commorative  Upgrade Edition is intended for those who wish to upgrade their SuperDisc 1.0 through 14.0. Each year we add over 1,000 posts. Don’t miss out.

Resource Collection 6.0 is great to own too!!!

The Resource Collection 6.0 contents include CC Catalogs and Brochures. CC Service Bulletins, CC Price Lists. Engine & Transmission Manuals. Dick Avery sketches and drawings, a folder for every Commander model, and all kinds of technical and interesting stuff as well as archived posts for 2019 and 2020. Over 193 folders and 2,823 Files. A true “Treasure Trove” for the Commander owner!

We thank you for supporting the club with your purchase of SuperDisc15.0 Morland Commemorative Edition  and/or Resource Collection 6.0. We hope you find it to be the value we feel it is, and trust you will enjoy the other benefits your payment will help provide. It’s your payment that helps to support the activities of this dues free organization that has grown from 12 members in 1999 to well over 4930 members in January 2021.

To order now click here!

_________________________

     

© 2021   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service