WINDSHIELD NEEDED! FOR LANCER 23

Trying to track down an original windshield for my 1972 CC Lancer 23'. If anyone has any leads or is off loading parts from a dead boat please let me know! My boat has passed hands quite a few times and one previous owner replaced the original windshield with a black frame and tinted plexi. Really hoping to get it back to the original.

Also, if someone's had a replacement made by Taylor Made (the original manufacturer) it would be great to know how it turned out!

Thanks,
- Ian

Views: 282

▶ Reply to This

Replies to This Discussion

Permalink Reply by Theodore Carpluk Jr on July 21, 2019 at 9:33am

Ian, how did you make out with finding a windshield ?  I need a starboard panel for my original Taylor made that just shattered this week. Thank, Ted

Permalink Reply by Jeremy Goldstein on July 21, 2019 at 10:37am

Taylor will still make pieces or even whole windshields to replace or repair their older designs

Permalink Reply by Theodore Carpluk Jr on July 22, 2019 at 6:04am

Jeremy,  I called and didn't get that information. I'll try again and hopefully I can talk with someone with more experience this time. Thanks. 

Jeremy Goldstein said:

Taylor will still make pieces or even whole windshields to replace or repair their older designs

Permalink Reply by Ian Basilion on July 22, 2019 at 8:25am

Taylor made gave be a rough quote (3-5K) to replace the full windshield but the new one wont retain the curve of the original. Instead it uses flat glass. I didn't ask about replacing the curved glass but a friend of mine who also has a Lancer tried a while back but ended up just using plexi for the broken pain. 

Permalink Reply by Theodore Carpluk Jr on July 22, 2019 at 10:32am

Thanks for that info, I will be replacing it with plexiglas for now.

Ian Basilion said:

Taylor made gave be a rough quote (3-5K) to replace the full windshield but the new one wont retain the curve of the original. Instead it uses flat glass. I didn't ask about replacing the curved glass but a friend of mine who also has a Lancer tried a while back but ended up just using plexi for the broken pain. 

Permalink Reply by Jeremy Goldstein on July 22, 2019 at 7:23pm

Heres a 23 lancer we had Taylor Made make  a modified port side hinging middle section to retrofit the existing windshield so we could eliminate  the original center frame that tends to whack you in the forehead 

Permalink Reply by Theodore Carpluk Jr on July 24, 2019 at 11:44pm

Nice job ! After seeing that, I will be looking into a Taylor Made over the winter for a new one. I'll use the plexi through this season for now.Thanks for the info. Oh yeah, I still hit my head on that cross member at least once a month.

Jeremy Goldstein said:

Heres a 23 lancer we had Taylor Made make  a modified port side hinging middle section to retrofit the existing windshield so we could eliminate  the original center frame that tends to whack you in the forehead 

Permalink Reply by Jeremy Goldstein on July 26, 2019 at 8:21am

Thanks Theodore!

I did have to add some extra structure and additional fiberglass to the uprights that support the dash on both sides . With out that orig cross bar the windshield lost a little rigidity.  But once done it was stronger than original  and no more goose eggs on foreheads

Permalink Reply by Douglas Low on August 20, 2019 at 9:08am

Ian

There is a guy on Facebook marketplace that is selling a 23 lancer with an extra windshield. maybe he would part with it. the boat is in Ticonderoga NY

https://www.facebook.com/marketplace/item/376259093025180/

Hope it works out, 

Doug

Permalink Reply by Ian Basilion on August 20, 2019 at 9:01pm

Thanks for the lead. It looks like he's asking a bit too much. We'll see if he comes around.

▶ Reply to Discussion

RSS

Club News

2020 National Rendezvous Postponed

More information Click Here

_________________________

SuperDisc 15.0 and Resource Collection 5.0 Available Now!

SuperDisc 15.0 is an electronic encyclopedia of every aspect of Commander maintenance and repairs. The information on the disk is retrieved from the discussion forum and e-mail list, but organized in a way that makes information easy to find and use. SuperDisc is available on USB flash drive

Click here for more details https://commanderclub.com/page/superdisk

The SuperDisc 15.0 Complete Edition is for first time buyers of SuperDiscs.

The SuperDisc 15.0 Upgrade Edition is intended for those who wish to upgrade their SuperDisc 1.0 through 14.0. Each year we add over 1,000 posts. Don’t miss out.

Resource Collection 5.0 is great to own too!!!

The Resource Collection 5.0 contents include CC Catalogs and Brochures. CC Service Bulletins, CC Price Lists. Engine & Transmission Manuals. Dick Avery sketches and drawings, a folder for every Commander model, and all kinds of technical and interesting stuff. Over 193 folders and 2,697 Files. A true “Treasure Trove” for the Commander owner!

We thank you for supporting the club with your purchase of SuperDisc15.0 and/or Resource Collection 5.0. We hope you find it to be the value we feel it is, and trust you will enjoy the other benefits your payment will help provide. It’s your payment that helps to support the activities of this dues free organization that has grown from 12 members in 1999 to well over 4400 members in 2020.

To order now click here!

_________________________

2019 Annual Photo Contest Winners

Sixty-Eight photos were submitted for this year's contest.  They were absolutely amazing, making selecting a top 3 an extremely difficult task for your Executive Committee. 

Thank you to all that submitted a photo to the contest and even if your photo was not in the top 3, it could appear on a cover of Styled In Fiberglass, the club's newsletter due out in November, or the 2020 Wall Calendars, which are now available.

2019 Photo Contest Winners

Past Photo Contest Winners

2019 Photo Contest Entries

_________________________

     

© 2020   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service