Russell Moore
  • Male
  • Surrey
  • Canada

Russell Moore's Friends

  • Steve Durkee
  • Bob Blochlinger
  • Craig Borner
  • Daniel
  • Bret Wesson
  • Cole knight
  • Carman Beech
  • Greg Beardmore
  • Cary Boring
  • John L. Spooner Jr.
  • David Cronovich
  • Paul Heid
  • James L. Gordon
  • John Scherzinger
  • Lee H Dahlen

Russell Moore's Discussions

New Swimgrid... On my 30TF
7 Replies

For the last couple years I've been dreading the project of replacing the swim platform on my 30TF.  Not really sure how to tackle it.  It must have been added on 20 years ago.  While moving a davit…Continue

Started this discussion. Last reply by Russell Moore 18 hours ago.

Use of Zinc Prop Paint
4 Replies

Just finished my annual haul out.  Last year I used a Zinc Paint made by Petit.  It advertises to be corrosion protection but several other people I know found it is also good at for antifoutling on…Continue

Started this discussion. Last reply by Chris Wickersham Jun 16, 2018.

Drill a Hole In Distributor Cap!
20 Replies

I still have some condensation under a distributor cap.  Had this issue on the other engine last year.  I've had one suggestion to drill two very small holes in the cap, one between two points the…Continue

Started this discussion. Last reply by Kevin McKinnon Jul 26, 2018.

Engine Stall... Transmission goes Clunk Clunk Grind
13 Replies

Got out on Saturday for a test run... first time away from the dock this year.  I've run the engines a few times and all my winter tasks are complete.  20 feet from the dock the Port engine dies. …Continue

Started this discussion. Last reply by Russell Moore May 3, 2018.


Russell Moore's Page

Profile Information

Which Commander model do you presently own?
30 TF
Boat Year
Boat Name
Whiskey Business
Other Gasoline
Home Port
Crescent Beach BC
Surrey BC Canada
Non US
Phone Number
604 617 9555

Comment Wall (6 comments)

You need to be a member of Chris Craft Commander Club to add comments!

Join Chris Craft Commander Club

At 3:12pm on July 12, 2020, Chuck Strickland said…

Russell, your measurements where perfect. Boat in N.C. now. Do you have a picture of how the spray/ wind shields is sealed at the flybridge fiberglass. I need to reinstall and I did not see it before removal.  

Thanks,  Chuck

At 6:15pm on June 4, 2020, Chuck Strickland said…

Thank you very much. You have a great looking TSF.

At 4:40pm on June 4, 2020, Chuck Strickland said…


 Just purchased a 30 T from Florida. Can you possible tell me the overall height for hauling. Keel to top of windshield.

Thank you ,

Chuck Strickland

At 7:26pm on June 3, 2018, John L. Spooner Jr. said…

Hello Russell, boat is finally in the water but still have a few bugs to remove!  Gonna try to send you a few pictures, hope you have yours running well.

At 3:00pm on May 12, 2018, John L. Spooner Jr. said…

Hello Russell, just curious how you are making out with your boat?  I also had start issues with the previous engines.  Hope you got your distributers back in shape and running smoothly again.

At 2:15pm on August 29, 2016, James L. Gordon said…

I have my boat out of the water and found I need to replace my wheels.  The boat originally had 18 X 20, 3-blade wheels giving me a lot of prop slip and issues with the aft wanting to swing forward when the vessel plowed into 6' or higher waves.  I put 18 X 18 4-blade wheels and significantly reduced prop slip and was able to plow through waves without the aft end swinging around in heavy seas.  With 18 X 20 3-blade wheels the new Blue Water Mercruiser 5.7 Liter inboards reached 4200 RPM max and 4350 RPM max with the 4-blade 18 X 18 wheels.  I measured the shaft distance to the bottom of my hull and found I have 11.75 inches of clearance.  This means I can put 19 X19 3-blade wheels on the boat.  I plan to run some simulations to see which wheels give me the best range for my boating requirements.  I am having a new fiberglass tank installed which will hold more fuel so I need to re-enter my fuel weight parameters before I can make my decision.  I hope to know the tank volume later this week.

As far as your boat;  I would be willing to run  your parameters to see what the program recommends but you should also give the same info you give me to your wheel salesman to confirm / recommend wheels for your vessel.  Let me know if I can help.  I won't charge you anything to run the simulation.  It would be helpful if I do run your boat through the system, to get your water speed versus RPM results for various RPM's with your current configuration and after you put on new wheels.  The program has a lot of graphs that will show what improvements are realized and what your range/fuels cost will be at various RPM's and loads.

Russell Moore's Photos

  • Add Photos
  • View All

Club News

2020 National Rendezvous Postponed

More information Click Here


SuperDisc 15.0 and Resource Collection 5.0 Available Now!

SuperDisc 15.0 is an electronic encyclopedia of every aspect of Commander maintenance and repairs. The information on the disk is retrieved from the discussion forum and e-mail list, but organized in a way that makes information easy to find and use. SuperDisc is available on USB flash drive

Click here for more details

The SuperDisc 15.0 Complete Edition is for first time buyers of SuperDiscs.

The SuperDisc 15.0 Upgrade Edition is intended for those who wish to upgrade their SuperDisc 1.0 through 14.0. Each year we add over 1,000 posts. Don’t miss out.

Resource Collection 5.0 is great to own too!!!

The Resource Collection 5.0 contents include CC Catalogs and Brochures. CC Service Bulletins, CC Price Lists. Engine & Transmission Manuals. Dick Avery sketches and drawings, a folder for every Commander model, and all kinds of technical and interesting stuff. Over 193 folders and 2,697 Files. A true “Treasure Trove” for the Commander owner!

We thank you for supporting the club with your purchase of SuperDisc15.0 and/or Resource Collection 5.0. We hope you find it to be the value we feel it is, and trust you will enjoy the other benefits your payment will help provide. It’s your payment that helps to support the activities of this dues free organization that has grown from 12 members in 1999 to well over 4400 members in 2020.

To order now click here!


2019 Annual Photo Contest Winners

Sixty-Eight photos were submitted for this year's contest.  They were absolutely amazing, making selecting a top 3 an extremely difficult task for your Executive Committee

Thank you to all that submitted a photo to the contest and even if your photo was not in the top 3, it could appear on a cover of Styled In Fiberglass, the club's newsletter due out in November, or the 2020 Wall Calendars, which are now available.

2019 Photo Contest Winners

Past Photo Contest Winners

2019 Photo Contest Entries



© 2020   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service