Wayne Roworth
  • Flintville, TN
  • United States

Wayne Roworth's Friends

  • A Dopo
  • Thomas C Clark
  • Mark Voetter
  • Bill Patterson
  • PJ Ruh
  • Capt Jeff Wilbanks
  • Steve
  • Bruce Harkness
  • Kevin Mueller
  • Roger Thompson
  • Jeff Pacy
  • Byron Smith
  • John Scherzinger
  • Philip J McBride
  • Brian Barton

Wayne Roworth's Discussions

Stuck Sea Cock Strainer
6 Replies

One of my Sea cock valves similar to the attached pic is stuck open. The cylinder handle is missing and I have been using a small bolt to close it. Should I heat it up? Put a screw driver in it and…Continue

Started this discussion. Last reply by Wayne Roworth Jan 15, 2018.

Height of a 67 Commander Sedan FB
2 Replies

I could not find this in the models section of the site. Would anyone offhand know the height from the waterline to the FB rail or FB helm on a 67 Commander Sedan FB? My Bimini is 4 ft. I need this…Continue

Started this discussion. Last reply by Dave Bernard Apr 4, 2017.

3000 RPM Limit for Crusader 454 and electronic ignition.
8 Replies

My port engine will not exceed 3000 RPM. It has a laboring sound at this point. The starboard engine kicks into that sweet sounding "Wah" sound at around 3500 RPM but even it does not exceed that…Continue

Started this discussion. Last reply by Wayne Roworth Jul 28, 2016.

Additional Gas Reservoir
13 Replies

Hi everyone! I'm contemplating running the Tombigbee waterway from Tennessee to Mobile and I have read there is an over 200 mile stretch with no gas pumps. My 38 Commander will not cruise that far.…Continue

Started this discussion. Last reply by Marcia Elkins Mar 17, 2016.


Wayne Roworth's Page

Profile Information

Which Commander model do you presently own?
Do not own a Commander
Boat Year
Don't know
Spouse's full name
Jan Roworth

Wayne Roworth's Photos

  • Add Photos
  • View All

Comment Wall (4 comments)

You need to be a member of Chris Craft Commander Club to add comments!

Join Chris Craft Commander Club

At 12:53pm on August 13, 2015, Timothy C. Gressett said…


My email has changed back to bonniedick@verizon.net and I just got around to correcting it.  I was wondering why I wasn't getting any messages from the forum!  Now I know................

Tim Gressett

At 12:39pm on May 21, 2015, Roger Thompson said…

Hi, Wayne. Salli and I both enjoyed meeting you and the other members at the regional at Hale's Bar Marina-you have a great boat! I did not expect to win anything at the drawing, but was sure pleased to receive the beautiful coffee mug-thank you. We look forward to meeting up with you and your wonderful wife once again and soon! Best regards, Roger

At 4:36pm on September 10, 2014, Jim Wick said…

Well, don't know what your gear reduction is on the re-power.  Maybe they
are the same 2.5:1 that the 427's used.  If it is different, that would
explain a lot.

The originals were 4394 & 4395.  They are T-33 and 23X25.  The Diesels used
23X26 with 2.0:1 gear reduction.

So, my guess is that you have different reduction gear.   When you get that
information, a change in props will be clearer.


At 11:41am on September 7, 2014, Dick Morland said…

I didn't recommend any props for Bill. He used the props that were on the boat when he got it. These are 4394 & 4395. T-33 style, 23" x 25". These props were used on diesel powered 38 sedans. They're a bit too much for you. I would recommend taking 1" of pitch out, preferably 2". Not all prop shops can do that on these big props. If you would like to discuss, call me on 331-442-5460 (My wife's cell, mine is in the hospital) :-(


Club News

2019 Regional Rendezvous Hosts Wanted

Are you yearning for a little fix for Commander-itis?

Would you like to meet other Commander owners in your area?

Do you have a great idea for a Commander gathering on or off the water?

If you answered yes to any of these questions, then we have just the remedy for you: We encourage you to think about hosting, or, indicating your interest in hosting a Regional Rendezvous in your area in 2019.

For more information about hosting - click here:

Hosting A Rendezvous

Char Pike has volunteered to be the EC “Point Person” for 2019 Regional Rendezvous. Please contact Char if you are interested in organizing & holding a Regional Rendezvous in your area. Char’s e-mail address is rendezvous.commanderclub@gmail.com


Help Wanted!!!

New Faces, New Perspectives - Executive Committee Openings to start in January 2020

Would you like to be more active in the Commander Club? Would you like to help chart our course? Are you willing to commit the time, energy and creativity needed to assist us in promoting and supporting our mission?

We are searching for new faces and new perspectives. Positions start in January 2020 for a two year term.

There are four positions available. Chief Commander, Treasurer, Public Relations Chair and Membership Chair.

Duties for each position are located in the bylaws https://commanderclub.com/page/bylaws

More details about each position here.

The Executive Committee (EC) convenes monthly via conference call. Meetings typically last 90 minutes or less. Most work done via e-mail. Each job has its own time commitment depending on club activities. Current EC members will mentor you.

Interested in any of these positions?

Please drop Char Pike an e-mail at archivist.commanderclub@gmail.com


2018 Photo Contest Winner

The 4th Annual Chris-Craft Commander Club Photo Contest had more than 50 entries and selecting the winners was not an easy task. 

First place: submitted by Pat Chaps

Second place: submitted by Martin Krall;

Third place: submitted by Jeff Pacy.

To view all entries to this year's contest,         Click Here

© 2019   Created by CCCC Webmaster.   Powered by

Badges  |  Report an Issue  |  Terms of Service